Call us today (705) 362-5699

The Power Up lineup has been engineered to reduce energy consumption and provide uninterrupted equipment operation through better lubrication. The Power Up product line consists of: Engine Maax, which is a boundary lubricant for engines, GearMaax, a boundary lubricant for gear oil, Hydra Maxx, a hydraulic system treatment, Gen 49D, a diesel fuel top end lubricant that is a combustion enhancer and injector cleaner that increases mileage, LHP-454, an unleaded fuel additive that can add as much as 15% in fuel economy, Thixogrease, a high pressure, high temperature grease, RCL1000, Penetrating Fluid 2000 and TL3000 which are all spray lubricant products.

 
  • Reduce Downtime and Catastrophic Failure
  • Improve Fuel Economy
  • Eliminate Dry-Starts
  • Extend Oil Service Life
  • Protect at Extreme Temperatures
  • Improve Energy Efficiency 

For more information, click here.

  • Reduce Downtime and Catastrophic Failure
  • Improve Fuel Economy
  • Eliminate Dry-Starts
  • Extend Oil Service Life
  • Protect at Extreme Temperatures
  • Improve Energy Efficiency Same Beneficts as EngineMaxx
  • EngineMaxxLA is Specifically Designed for use with low ash oil and high mileage/high hour equipment
For more information , click here.
  • Reduce downtime and catastrophic Failure
  • Extend Oil Service Life
  • Protect at Extreme Temperatures
  • Reduce Corrosion
  • Improve Energy Efficiency 

For more information, click here.

  • Enhance Cold Weather Operation (AntiFreeze) 
  • Reduce Catastrophic Failures & Downtime
  • Extend Fluid Life
  • Enhances Components Life
  • Separate Water from Hydraulic Fluid

For more information, click here.

  •  Enhance Fuel Economy
  • Stabilize Fuel
  • Improve Fuel Economy
  • Provide Against Winter Gelling
  • Prevent Rust & Corrosion
  • ULSD Compliant & Approved for use in Engines with DPS Systems

For more information, click here.

  • Restore Engine Power
  • Improve Fuel Economy
  • Clean Fuel System in one application
  • Avoid Costly Repairs

For more information, click here.

  • Prevents filter plugging caused by thermal stresses on the fuel
  • Prevents fuel soot and sludge formation, extending filter and injector life
  • Cleans and Prevents injector deposits in high pressure fuel injection systems
  • Increases cetane 3 to 5 points
  • Provides thermal and oxidative stability
  • Improves fuel economy
  • Reduces NOx Emissions and Particulate Matter
  • Enhances lubricity with a fully synthetic, non acid lubricity improver
  • Water dispersant to help safely remove water on a gradual basis
  • Synthetic corrosion inhibitors
  • Reduces costs of maintenance and downtime.

For more information, click here.

  • Resist Moisture
  • Protect Over a Wide Temperature Range
  • Protect Againt Corrosion
  • Minimize Lubrication Frequency
  • Extend Component Life
  • Available in NLGI Grade 0 & 2, and ThixoTak2 

For more information, click here.

  • Long Lasting Lubrication
  • Corrossion Protection
  • Tarnish Free
  • Seal Compatibility (except EDPM)
  • Smooth Operation
  • Industrial Grade Protection

For more information, click here.

  • Rapid Penetration of Rusted or Seized Parts
  • Easy Application
  • Rust & Oxidation Prevention
  • Penetration in Wet Conditions
  • Water Solubility 

For more information, click here.

Triumph Lubricants are by definition environmentally responsible according to OECD standards. Maryn International produces these lubricants using high quality base stocks that will biodegrade in the natural environment. In most cases these are finished oils that have been developed for a specific application. Most Triumph products also have a Marinus version that can be substituted if greater biodegradability is required. These products can also be used with confidence in all environmentally sensitive areas.

Find the Triumph product you are looking for here and then click on the link to see the information you need. 

Marinus

 Marinus Lubricants are by definition readily biodegradable according to OECD standards. Maryn International produces these lubricants using high quality canola base stocks or highly refined synthetics that are readily biodegradable. These products can be used with confidence in all environmentally sensitive areas. In most cases these are finished oils that have been developed for specific applications

Find the Marinus product you are looking for here and then click on the link to see the information you need.

 

 Performance plus anti-wear hydraulic oil designed for heavy duty use and high levels of performance over a wide range of pressures.

Engineered for performance and anti-wear protection
  • Anti-wear formula for all vane, gear and piston pumps
  • Rust and Corrosion protection
  • Excellent anti-foam properties and air entrainment performance
  • Strong hydrolytic stability and power transfer propensity
  • Thermal stability and oxidation resistance
  • Suitable for ultra fine filtration
  • Good water separation
  • Highly versatile and compatible with pump designs and seal materials
  • Meets or exceeds Dennison HF-O, HF-1, HF-2
  • Meets or exceeds Vickers 35VQ25, Eaton/Vickers M2950-S, I286-S
  • Meets or exceeds Cincinnati Machine P-68, P-69, P-70
  • Meets or exceeds Ford M6C32, Chrysler, General Motors LS-2
  • Meets or exceeds US Steel 136
  • Available in ISO 32, 46, 68 viscosity grades.

 

 

 

 

Hydraulic system technology relies on high quality oils performing the dual role of lubricating the system and providing fluid power transfer. Modern high pressure pump systems require anti-wear protection coupled with the prevention of rust, corrosion, varnish buildup , foaming and air entrainment. Hydris MX is designed and tested to meet these needs in most hydraulic applications.

For information, click here. 

Engineered for performance and anti-wear protection

  • Enhanced Anti-wear formula for long life protection of all vane, gear and piston pumps
  • Maximizes power transfer efficiency
  • Long life formula extends fluid service
  • Improves equipment operability over a wide range of temperatures and pressures
  • Rust and Corrosion protection
  • Excellent anti-foam properties and air entrainment performance
  • Superior hydrolytic stability and power transfer propensity
  • Reduces Energy consumption
  • Thermal stability and oxidation resistance
  • Suitable for ultra fine filtration
  • Improved water separation
  • Highly versatile and compatible with pump designs and seal materials
  • Meets or exceeds Dennison HF-O, HF-1, HF-2
  • Meets or exceeds Vickers 35VQ25, Eaton/Vickers M2950-S, I286-S
  • Meets or exceeds Cincinnati Machine P-68, P-69, P-70
  • Meets or exceeds Ford M6C32, Chrysler, General Motors LS-2
  • Meets or exceeds US Steel 136
  • Available in ISO 32, 46, 68 viscosity grades.

Hydraulic system technology relies on high quality oils performing the dual role of lubricating the system and providing fluid power transfer. Modern high pressure pump systems require anti-wear protection coupled with the prevention of rust, corrosion, varnish buildup , foaming and air entrainment. Hydris MX GOLD is designed and tested to meet these needs in demanding applications. Maximize the benefits of advanced fluid technology to achieve the optimal operational performance.

For information, click here.